Red-y Smart, regulátor prietoku plynu, G1/4", do 60 ln/min..

Regulátor prietoku red-y smart GSC
Vysoko presný tepelne hmotnostný regulátor prietoku
Prietok do 60 ln/min (64 SLPM) pre vzduch
Pripojenie telesa ¼”
Vyhotovenie: anodizovaný hliník alebo nerez

Rozsahy merania
Voliteľný rozsah prietoku (vzduch)	Od 0 … 25 mln/min do 0 … 60 ln/min (od 0 … 27 SCCM do 0 … 64 SLPM)
INSTRUMENT VERSIONS
“Standard” Ekonomická verzia	Presnosť: ± 1.0% z celk. rozsahu* Dynamika: 1 : 50
“Hi-Performance” Najvyššia verzia a dynamika (available for GSM < 200 ln/min (200 SLPM) / GSC < 150 ln/min (150 SLPM) (air))	Accuracy: ± 0.3% of full scale + ± 0.5% of reading* Turndown ratio: 1 : 100 *An additional error of ±0.25% may apply for analogue signals
PERFORMANCE DATA
Media (real gas calibration)	Air, O2, N2, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) *O2 & N2 are calibrated with air
Response time	Meter (GSM): ± 80ms; Controller (GSC): ± 500ms *depending on device configuration & according to SEMI standard E17-1011, 5-100% of range under optimized conditions
Repeatability	± 0.2% of full scale (according to SEMI standard E56-0309)
Longterm stability	< 1% of measured value / year
Power supply	24 Vdc (18 – 30 Vdc), 15 Vdc on request
Current consumption Standard	Meter (GSM): max. 100 mA; Controller (GSC): max. 250 mA (GSC with valve type 8 max. 490mA)
Current consumption Profinet RT / EtherCAT	Meter (GSM): max. 125 mA; Controller (GSC): max. 340 mA (GSC with valve type 8 max. 560mA)
Operation pressure	0.2 – 11 bar a (3 – 160 psia) / GSC with valve type 4.5 and 8 max. 8 bar a (120 psia)
Temperature (environment/gas)	0 – 50°C (32 – 122°F)
Body Materials	Anodized aluminum, optional stainless steel electropolished
Seals	FKM, EPDM, optional FFKM
Pressure sensitivity	< 0.2% / bar of reading (typical N2)
Temperature sensitivity	0.025% FS measuring range type per 1°C (<0.012% per 1°F)
Warm-up time	< 1 sec. for full accuracy
INTEGRATION & INSTALLATION
Output signals analog	0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V, 2-10 V
Output signals digital	RS-485; Modbus RTU (Slave); LabView-VIs available Option: Profibus DP-V0, DP-V1 / Profinet RT / EtherCAT
Process connection	G¼” (BSPP* female) up to 60 ln/min (64 SLPM) G½” (BSPP* female) up to 450 ln/min (480 SLPM) *British Standard Pipe Parallel
Inlet section	None required
Electrical connection	Sub D plug, 9 pole
Mounting orientation	Any position (consult manufacturer above 5 bar or vertical mounting)
SAFETY
Test pressure	16 bara (240 psia)
Leak rate	< 1 x 10-6 mbar l/s He
Ingress protection class	IP50
EMC	EN 61326-1